Valspar® Fast Prep™ All-In-One Concrete Cleaner

Valspar® Fast Prep™ All-In-One Concrete Cleaner is the crucial first step in most Valspar concrete-coating projects to ensure the best finish. Fast Prep extends the life of the coating, provides maximum durability and allows the coating to bond tightly to concrete. Fast Prep cleans, degreases and etches in one easy step, saving you time and money.

  • Cleans, degreases and etches in one easy step
  • Extends the life of patio, driveway, sidewalk and garage floor coating
  • Safer and easier to use than muriatic acid

Sizes

3.78 L



HOW TO USE

  • Usage
    Bare, uncoated concrete
  • Application
    Wear rubber boots, rubber gloves and eye protection at all times while using this product. Protect plants and landscaping from direct contact and runoff. Transfer into a plastic watering can. Do not use a metal watering can. Inspect floor for grease and oil stains. Spot apply Fast Prep™ directly to these areas and scrub thoroughly with a stiff brush. Rinse with water. Difficult areas may require a second application and scrubbing. Divide the surface into 10' x 10' sections. Pre-wet surface using a garden hose, avoid puddles. To apply Fast Prep, sweep watering can back and forth as you pour to ensure complete coverage. Using a stiff bristle brush, spread Fast Prep over section completely. It should begin to fizz or bubble, this is normal. Rinse all tools, material and personal protection with water before storing. Wash affected clothing.
  • Dry Time

    To The Touch: 4 hour - 4 hour
  • Dry to the Touch*

    4 hour - 4 hour

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar fast prep all-in-one concrete cleaner.

Product Number Base Container Size SDS PDS
042397705694 - 3.78 L SDS PDS