Valspar® Oil Stain Remover

Valspar® Oil Stain Remover quickly and easily absorbs and lifts stains from concrete without scrubbing. It's an important preparatory component to any concrete painting or staining project.

  • Prepares surfaces for a strong, long-lasting topcoat, stain or sealer
  • Lifts away stains to clean and degrease concrete
  • Easy to use. No scrubbing required


1.89 L


  • Application
    SHAKE WELL BEFORE USE. Always test a small area before use. Do not use on wet surfaces. For best performance, use when temperature is above 60 °F (16 °C). 1. Scrape off buildup and sweep area. 2. Apply to stain, starting one inch beyond perimeter and working toward the center. 3. Allow 5–8 hours to dry. 4. Sweep up powder. 5. Immediately rinse the area with a strong stream of water. 6. Provide adequate ventilation and allow moisture to evaporate. If stain remains, reapply, scrub with stiff-bristled brush and repeat steps 3 thru 6.
  • Application Temperature

    15 - 32 °C (59 - 89 °F)

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar oil stain remover.

Product Number Base Container Size SDS PDS
042397705793 - 1.89 L SDS PDS