Valspar® SeasonPLUS® Exterior Paint & Primer

Valspar® SeasonPLUS® Fade-Resistant Paint + Primer with complete colour defense™ blocks UV rays plus gives a mold- and mildew-resistant finish for a longer lasting colour. This 100% acrylic formula also offers excellent hide along with a strong finish that resists cracking and peeling.

  • Complete colour defense™
  • Fade-Resistant Paint + Primer
  • Excellent hide and coverage
  • Extra protection from cracking, peeling and blistering
  • Provides a mold- and mildew-resistant coating
  • Low-temp application


Flat, Satin, Semi-Gloss


872 mL / 1 Quart

3.43 - 3.66 L / 1 Gallon

18.3 L / 5 Gallons


23 m²/3.78 L - 37 m²/3.78 L

(400 sq. ft. per gallon)


  • Usage
    Properly prepared exterior surfaces of wood, hardboard, aluminum siding, vinyl siding, masonry, brick, stucco, cement composition panels and metal. Not for use on floors.
  • Prep
    Remove all surface contamination by washing with an appropriate cleaner, rinse thoroughly and allow to dry. Scrape and sand peeled or damaged paint to a sound surface. Sand glossy surfaces dull. Seal stains from water, smoke, ink, pencil, grease, etc. with the appropriate primer/sealer. Caulk around windows, doors, and other openings after spot priming bare surfaces with SeasonPLUS™ Exterior Paint + Primer.
  • Application
    Stir paint thoroughly. Intermix containers for uniformity. When air temperature is 35°F, substrates may be colder; prior to painting, check to be sure the air, surface, and material temperatures are above 35°F and at least 5°F above the dew point. Avoid using if rain or snow is expected within 2-3 hours. Do not apply when air or surface temperatures may drop below 35°F within 48 hours. On large expanses of metal siding, the air, surface, and material temperatures must be 50°F or higher. These recommendations are a starting point only. Due to variability in sprayers, we recommend testing your spray pattern and flow before proceeding. Always paint back into freshly painted areas and end up at a door, window or outer edge. Move windows after 1 hour to prevent sticking.
  • Dry Time
    Dry Time @ 25 °C (77 °F) and 50 % Relative Humidity
    To The Touch: 1 hour - 2 hour
    Recoat: 1 hour - 2 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water.
Application Temperature
2 - 32 °C (35 - 89 °F)
Recommended Coats
2 coats
Dry To the Touch*
1 hour - 2 hour
1 hour - 2 hour
*Dry Time @ 25 °C and 50 % Relative Humidity
Related Article
How to Choose a Color

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar seasonplus exterior paint primer.

Product Number Sheen Base Container Size SDS PDS
080047006494 Semi-Gloss Deep Base 872 mL
(1 Quart)
080047006500 Semi-Gloss Deep Base 3.48 L
(1 Gallon)
080047005954 Flat Extra White 3.66 L
(1 Gallon)
080047005961 Flat Extra White 18.3 L
(5 Gallons)
080047006210 Semi-Gloss Extra White 3.66 L
(1 Gallon)
080047006487 Semi-Gloss Extra White 18.3 L
(5 Gallons)
080047006197 Satin Ultradeep Base 3.43 L
(1 Gallon)
080047006135 Satin Extra White 3.48 L
(1 Gallon)