HOW TO USE

• Usage
  Ideal for use on properly prepared exterior wood, concrete, and primed metal such as porches, patios, breezeways, and concrete floors. Not for use on exterior wood decks, garage floors or other automobile parking areas.
• Prep
  The surface must be clean, dry and free of all loose or peeling paint. Thoroughly clean surface and remove wax and grease with an all-purpose cleaner (TSP or substitute). Remove gloss from previously painted surfaces by sanding.
• Application
  Mix well before and during use. If using more than one container, intermix all cans of the same colour. Use a premium-quality, polyester brush for small area (stairs, etc.). For large areas, pour Valspar® Anti-Skid Porch and Floor Paint coating in a long, continuous bead across the "shorter side" of the surface. Spread the product uniformly with a premium-quality, 1/4" or 3/8" nap roller and finish with long, even strokes in one direction. After drying 24 hours, apply the second coat if necessary or desired, at a right angle to the first coat — again finishing with long, even strokes in one direction.
• Dry Time
  Dry Time @ 25 °C (77 °F) and 50 % Relative Humidity
  To The Touch: 24 hour - 72 hour
  Recoat: 24 hour
• Clean-up & Disposal
  Clean tools and hands with warm, soapy water.