Actual colour may vary from on-screen representation.
Valspar® Porch & Floor Anti-Skid Paint
Valspar® Porch & Floor Anti-Skid Paint is a 100% acrylic, textured surface coating for various concrete, asphalt and other floor surfaces: walkways, tennis courts, pool decks, steps, ramps, laundry areas, etc. Skid-Not provides excellent traction quality and colour fastness on interior and exterior surfaces. Easy to apply and soap-and-water cleanup.
Paint Sheen Comparison
Available sheens for this product
3.43 - 3.78 L / 1 Gallon
7 m²/3.78 L - 10 m²/3.78 L
(110 sq. ft. per gallon)
HOW TO USE
UsageUse on concrete, asphalt, previously coated surfaces, primed wood and metal. Not recommended for ponding water areas. Not for use on exterior wood decks, garage floors or other automobile parking areas.
PrepAll surfaces should be fully cured, reasonably smooth and free from any dirt or loose foreign materials, drippings, oil or grease. Scrub oil-soaked surfaces with a strong degreaser compound. Remove all traces of the degreaser by scrubbing the area with a brush and a large amount of clean water and allow to dry completely. Power washing is an excellent way to clean large areas quickly. Clean joints and cracks to remove all foreign material. Patch voids with appropriate crack patching material. Areas where ponding water is evident should be leveled prior to application.
ApplicationPaint only when surface and air temperatures are 55–90 °F (13–32 ºC). Avoid application in direct, hot sun, or late in the day, or when dew or rain is likely in the next 8 hours. Do not apply to wet surfaces or areas prone to ponding water. Mix well prior to application and occasionally during application in order to keep the texture of the finish uniform. Intermix all cans to ensure colour and sheen uniformity. Apply to small areas (stairs, etc.) with a high quality polyester brush and to large areas with a 1/4" or 3/8” nap roller. For large areas, pour Skid Not® Coating in a long, continuous bead across the “shorter side” of the surface. Spread the product uniformly and finish with long, even strokes in the same direction for uniform sheen and texture. After drying, apply second coat, if necessary or desired, at a right angle to the first coat after 24 hours drying time. Thinning is not recommended.
Dry TimeDry Time @ 25 °C (77 °F) and 50 % Relative HumidityTo The Touch: 24 hour - 24 hour Recoat: 24 hour
Clean-up & DisposalUse soap and water to clean tools and equipment immediately after use. Discard used roller covers.