Valspar® Exterior Primer/Sealer

Valspar​® Exterior Primer/Sealer is formulated with 100% acrylic resin for excellent adhesion, long-lasting protection and resistance to peeling and blistering under oil and water-based topcoats.

  • Seals, primes and protects outdoor surfaces
  • Dries to a mold, mildew & fungi-resistant finish
  • Rain-ready in just 1.5 hours; applies as low as 1 ºC
  • Seals wood, concrete, masonry, vinyl and more
  • 100% Acrylic latex
  • Tintable for enhanced colour coverage
  • Use with all paint sheens and all topcoats
  • Soap and water cleanup


27 m²/3.78 L - 37 m²/3.78 L

(400 sq. ft. per gallon)


  • Usage
    Use on properly prepared exterior surfaces, including bare wood, previously painted wood siding and trim, brick, concrete, cement, stucco, non-rusted galvanized gutters and downspouts. Bare redwood and cedar may require an additional coat to control severe staining areas. DO NOT USE over hardboard siding or gummy pine; use an exterior oil primer for these surfaces.
  • Prep
  • Application
    Stir thoroughly before and occasionally during use. Apply when air and surface temperatures are between 10 ° - 32 °C (50 ° - 90 °F). Thin only for spray application with up to 8 oz. of water per gallon. Apply a liberal coat of primer uniformly, working well into the surface.
  • Dry Time
    Dry Time @ 25 °C (77 °F) and 50 % Relative Humidity
    To The Touch: 45 minute - 2 hour
    Recoat: 2 hour - 24 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water.
Recommended Coats
1 coats
Dry To the Touch*
45 minute - 2 hour
2 hour - 24 hour
*Dry Time @ 25 °C and 50 % Relative Humidity
Related Article
How to Choose a Color

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar exterior primer-sealer.