Valspar® Interior/Exterior High Gloss Enamel

Valspar® Interior/Exterior High Gloss Enamel is ideal for cabinets, doors, trim, shutters, and even entire kitchens and bathrooms. Our gloss-lock formula provides a highly-durable and lustrous enamel that retains its glossy finish even after repeated cleaning. It’s guaranteed to last a lifetime inside or outside your home.

  • Interior / Exterior Paint + Primer
  • Durable, lustrous finish
  • Withstands wear, indoors and out
  • Excellent hide & silky smooth appearance
  • Gloss-Lock Formula: Freshly painted finish even after cleaning
  • Stain resistant and scrubbable
  • Burnish resistant to retain glossy finish
  • Gives mildew-resistant finish
  • Low odour, low VOC
  • 100% acrylic latex
  • Lifetime warranty

Sheens

Gloss


Sizes

857 - 946 mL / 1 Quart

3.43 - 3.78 L / 1 Gallon


Coverage

37 m²/3.78 L

(400 sq. ft. per gallon)



HOW TO USE

  • Usage
    Properly prepared, interior and exterior surfaces, including previously painted and primed: plaster, wood, brick, drywall, cement and metal.
  • Prep
    General: Thoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Remove gloss from shiny surfaces. Patch cracks and spot prime. Valspar Interior/Exterior High Gloss Enamel can be used to prime interior bare surfaces before applying the finish coat. For bare exterior surfaces, use an appropriate Valspar® exterior primer before using this product.Drywall and Plaster: Fill cracks, pits and voids with patching compound. Allow new plaster to fully cure and sand smooth. Remove all sanding dust. Prime new and bare surfaces with Valspar® Interior/Exterior High Gloss Enamel.Wood: Sand wood smooth and patch holes and imperfections with wood filler or putty and sand smooth. Remove all sanding dust. Remove sap and clean knotty areas. Prime new and bare surfaces with an appropriate Valspar® Interior Oil Primer.Metal: May be used to prime weathered, nonrusted galvanized gutters and downspouts. New galvanized surfaces should be primed with a galvanized metal primer, or washed with a mild muriatic acid solution, or allowed to weather for six months before painting. All iron and steel surfaces should be primed with an appropriate anti-rust primer.
  • Application
    Stir paint thoroughly. Intermix containers to ensure uniform colour. Apply with a premium-quality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colours may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage. Clean up with warm, soapy water.
  • Dry Time
    Dry Time @ 25 °C (77 °F) and 50 % Relative Humidity
    To The Touch: 1 hour - 8 hour
    Recoat: 8 hour
  • Clean-up & Disposal
    Clean up with warm, soapy water.
  • Application Temperature

    10 - 32 °C (50 - 89 °F)

  • Recommended Coats

    2 coats

  • Dry to the Touch*

    1 hour - 8 hour

  • Recoat*

    8 hour

*Dry Time @ 25 °C (77 °F) and 50 % Relative Humidity

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar interior-exterior high gloss enamel.

Product Number Sheen Base Container Size SDS PDS
042397706264 Gloss Ultra White Base A 3.78 L
(1 Gallon)
SDS -
042397706257 Gloss Ultra White Base A 946 mL
(1 Quart)
SDS -
080047005329 Gloss Base C 3.43 L
(1 Gallon)
SDS -
080047005312 Gloss Base C 857 mL
(1 Quart)
SDS -