Valspar® All-in-One Wood Prep

Cleans, brightens and removes stains from wood surfaces so you can stain or waterproof them for better, longer-lasting results.

  • Prepares the surface by restoring wood's natural color and beauty
  • Eliminates tannin stains, rust stains and mill glaze
  • Brightens and removes stains

Sizes

3.78 L / 1 Gallon


AVAILABLE AT INDEPENDENT RETAILERS

HOW TO USE

  • Usage
    Decks, fences, outdoor furniture and other exterior wood surfaces
  • Prep
  • Application
    1. Add contents of container to a plastic bucket or plastic pump up sprayer. Do not use a metal container. Do not thin. 2. For ease of application, apply Valspar® All-In One Wood Prep with a pump-up sprayer, or use a synthetic bristle brush or roller. 3. Apply to no more than 5-10 boards (20 sq. ft) at a time to maintain adequate surface wetness and to allow best results. Immediately and thoroughly rinse any overspray or accidental spills with water. 4. Allow Valspar® All-In-One Wood Prep to remain on wood for 10-15 minutes. For best results, lightly scrub surface with a stiff, synthetic bristle brush. Do not let Valspar® All-In-One Wood Prep completely dry during application. 5. Thoroughly rinse the surface with a garden hose or pressure washer, removing all residue. After rinsing the surface, be sure to saturate the ground around plants and shrubs with fresh water. 6. Stubborn stains or missed areas may need to be scrubbed with additional Valspar® All-In-One Wood Prep and rinsed again.
  • Dry Time

    To The Touch: 10 minute - 15 minute
  • Clean-up & Disposal
    Rinse equipment and overspray areas thoroughly with water.
Dry To the Touch*
10 minute - 15 minute

Data Sheets

Download the product data sheet (PDS) and safety data sheet (SDS) for your Valspar all-in-one wood prep.

Product Number Base/Color Container Size SDS PDS
790417021445 - 3.78 L
(1 Gallon)
SDS -