HOW TO USE

• Usage
  Decks, fences, outdoor furniture and other exterior wood surfaces
• Prep
• Application
  1. Add contents of container to a plastic bucket or plastic pump up sprayer. Do not use a metal container. Do not thin. 2. For ease of application, apply Valspar® All-In One Wood Prep with a pump-up sprayer, or use a synthetic bristle brush or roller. 3. Apply to no more than 5-10 boards (20 sq. ft) at a time to maintain adequate surface wetness and to allow best results. Immediately and thoroughly rinse any overspray or accidental spills with water. 4. Allow Valspar® All-In-One Wood Prep to remain on wood for 10-15 minutes. For best results, lightly scrub surface with a stiff, synthetic bristle brush. Do not let Valspar® All-In-One Wood Prep completely dry during application. 5. Thoroughly rinse the surface with a garden hose or pressure washer, removing all residue. After rinsing the surface, be sure to saturate the ground around plants and shrubs with fresh water. 6. Stubborn stains or missed areas may need to be scrubbed with additional Valspar® All-In-One Wood Prep and rinsed again.
• Dry Time
  
  To The Touch: 10 minute - 15 minute
• Clean-up & Disposal
  Rinse equipment and overspray areas thoroughly with water.