HOW TO USE

• Usage
  Properly prepared, interior walls and ceilings Including previously painted and primed: Plaster, Wood, Brick, Drywall, Cement & Metal
• Prep
  Thoroughly clean the surface and allow to dry. Remove wallpaper and loose, peeling paint. Remove gloss from shiny surfaces. Patch cracks and spot prime. Valspar Signature® paint can be used to prime patched areas and bare surfaces before applying the finish coat. For best results on heavily stained areas, use a coat of Valspar® Interior Latex Multi-Purpose Primer. For drastic colour changes or deep, vivid colours, prime with Valspar® Interior Latex High Hiding Primer for optimal colour accuracy and coverage
• Application
  Stir paint thoroughly. Intermix containers to ensure uniform colour. Apply with a premium-quality roller, polyester brush or airless sprayer. Paint the ceiling first, then the walls. If applying by roller, roll from dry area into wet area using firm, crisscross strokes. Finish with long, even strokes in one direction. Note: Some deep or bright colours may require an additional coat to obtain complete hide. Surface conditions and application technique can also impact coverage.
• Dry Time
  Dry Time @ 25 °C (77 °F) and 50 % Relative Humidity
  To The Touch: 30 minute - 60 minute
  Recoat: 2 hour
• Clean-up & Disposal
  Clean up with warm, soapy water.