Valspar® Multi-Surface Primer/Sealer

This primer/sealer is ideal for sealing porous surfaces and allows the best overall appearance and performance of your paint.

Ideal for drywall, wood and masonry
Dries in 60 minutes
Recoat in 2 hours
Good hide
Improves topcoat performance
Zero VOC - Zero VOC applies only to base paint, VOC level may increase significantly depending on the colorant choice
Ideal for sealing porous surfaces
Works with all top coats
Great for brush, roller and spray application
May be used as packaged or tinted

3.78 L / 1 Gallon

18.9 L / 5 Gallons

Coverage

37 m²/3.78 L

(400 sq. ft. per gallon)

HOW TO USE

Usage

Properly prepared interior walls,ceilings and trim, including plaster, wood, drywall, brick and cement. Do not use on bare metal or overglazed or glossy surfaces
Prep

Thoroughly clean the surface and allow to dry. Remove all dirt, dust, chalk, rust, grease, wax and mildew. Scrape off loose and peeling paint. Thoroughly remove chalk by vigorous washing, then rinse. Bonds to clean, glossy surfaces. No need to remove gloss from shiny surfaces. Countersink nails and apply an oil-based metal primer to exposed nail heads. Caulk cracks and joints.
Application

Stir thoroughly. Intermix containers to ensure uniform colour. Apply with a premium-quality roller, polyester brush or airless sprayer. If applying by spray, back-roll or back-brush to work product into the surface. Apply a liberal coat of product uniformly, working well into the surface.
Dry Time

Dry Time @ 25 °C (77 °F) and 50 % Relative Humidity
To The Touch: 30 minute - 1 hour
Recoat: 2 hour - 4 hour
Clean-up & Disposal

Clean up with warm, soapy water.

Product Number		Sheen		Base/Color		Container Size		SDS		PDS
042397700361		-		White		3.78 L (1 Gallon)		SDS-		PDS-
042397700378		-		White		18.9 L (5 Gallons)		SDS-		PDS-